Classifying Tanks Archives | Mellott /product-category/wash-equipment/tanks/ Rock Crusher Equipment & Service Provider Mon, 12 May 2025 19:46:12 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 /wp-content/uploads/2022/09/cropped-favicon-32x32.png Classifying Tanks Archives | Mellott /product-category/wash-equipment/tanks/ 32 32 MC2035WTS Tank /product/mc2035wts-tank/ Mon, 04 Mar 2024 17:23:34 +0000 /?post_type=product&p=3153 Unit Standard 2035 gallon tank with 2″ outlet Manual 4-Point Leveling System Tandem Axle Suspension with Eight (8) 11R24.5 Tires Road Ready (airbrakes, mud flaps)

The post MC2035WTS Tank appeared first on Mellott.

]]> Unit

  • Standard 2035 gallon tank with 2″ outlet
  • Manual 4-Point Leveling System
  • Tandem Axle Suspension with Eight (8) 11R24.5 Tires
  • Road Ready (airbrakes, mud flaps)

The post MC2035WTS Tank appeared first on Mellott.

]]> McLanahan Sand-Manager Classifying Tank /product/mclanahan-sand-manager-classifying-tank/ Fri, 11 Aug 2023 13:18:46 +0000 /?post_type=product&p=2482 The McLanahan Sand-Manager Classifying Tank is designed to remove slimes, excess water, and undesirable grain sizes from natural or crushed sand feeds.

The post McLanahan Sand-Manager Classifying Tank appeared first on Mellott.

]]> Sand-Manager® Classifying Tanks are widely used in sand, gravel, and crushed stone washing plants around the world. The classifying method
is based upon the principle that slurried coarser sand settles near the feed end and finer sand is carried progressively further down the length
of the tank. Valve stations located throughout the tank are equipped with hydraulically-operated valves and torque motor-driven paddles. As
material accumulates at the base of a paddle, the motor stalls, signaling the appropriate product valve to open. As the correct percentage of
material is allocated to its proper collecting flume, the sand is re-blended for most construction sand specification products.
Available in 10′, 11′ and 12′ Wide units

Standard Features;

The Sand-Manager® Classifying Tank utilizes a percentage-based approach to control the classifying/reblending process. As material
accumulates at a given valve station, your designated percentage is discharged to each product. You simply enter these percentage values into
the Sand-Manager® controller to achieve the proper re-blending. Since each valve station operates independently, you can easily adjust the
percentages to compensate for feed and/or specification changes.

The post McLanahan Sand-Manager Classifying Tank appeared first on Mellott.

]]>