Pre-plumbed for single point fresh water connection (8″ pipe – 8″ Blot Flange)

(2) 1 /2″ Chase water connections with gate valve for even distribution between screws

Manifold with flow control valves for individual spray bars

11 Screen spray bars, each with V-Jet Nozzles

SCREEN CHUTES & FINES CHUTE
(2) 1 ½” Chase Water Connections w/ Gate Valve
for Even Distribution Between Screws
Manifold w/ Flow Control Valves for Individual

Spray Bars
11 Screen Spray Bars, Each w/ V-Jet Nozzles
Slurry Style Screen Feed Chute to Pre-Soak
Materal
Chutes Constructed from 3/16″ Mild Steel
w/ ½” Metal Backed Rubber Liners
Roll Away Oversize Discharge Chute w/ 2
Sets of Finger Gates for Blending
Reversible Discharge Chutes

ACCESS
Walkway Access Around 3 sides of Screen w/ Stair Access
to Grade
50 HP, 1200 RPM, TEFC (NEMA C) Motor
Single-Crown-Construction Decks for Side Tensioned
Media
Twin 36″x25′ Fine Material Double Screw Washer

SCREEN
Metso FS253, 6’x16′, 3 Deck, Horiztonal
Triple-Shaft, MV2 Mechanism
Weld-Free Side Plates w/ Huck Bolt
Construction
Pre-Plumed for Single Point Fresh Water Connection
(8″ Pipe – 8″ Blot Flange)
Fines Flume w/ Wash Back Line
Heavy Duty Fabricated Frame w/ Cribbing Supports
Dual Axle Suspension w/ 8 11R24.5 Tires
Replaceable Feed Box & Discharge Lip Liners

CHASSIS
Road Ready (Air Brakes, Light Kit, Mud Flaps)

FINE MATERIAL WASHER
1/4″ Mild Steel Tub Construction
Welded Steel Flights w/ Replaceable Shoes
Adjustable Discharge Chute
2 15 HP, 1800 RPM NEMA Premium Efficiency Motors

AVAILABLE OPTIONS
Pre-Wired Electrical Starter Panel
Hydraulic Leveling Legs w/ Power Pac

The post MC6163W Wash Plant appeared first on Mellott.

• METSO HRC8 High Pressure
  Grinding Roll Crusher
• 5.5 HP HPU Pump
• IC80C Automation System
• Feed Level Monitoring
• 100 HP (2) Drive Motors

Belt Feeder

• Class II Design
• 15 HP, 100 FPM, 36″ BW x 16″-5″ Long Conveyor
• TAII Dodge Shaft Mounted Gear Reducer
• Channel Frame Construction
• CEMA C5 Extended Center Idlers
• Full-Length Skirt Board with Canoe Liners
• 4-Ply, 440 PIW Conveyor Belting with 1/4″ x 1/16″ Covers
  GRII Belt, Vulcanized
• Primary Belt Cleaner

7.5 Yard Receiving Hopper

• 12′ x 12′-5″ Top Opening
• High-Angle Hopper, Constructed from ¼” Mild Steel w/
  1/2″ Rubber Liners
• Manual Level Control Gate
• Hydraulic Set up

Standard Equipment

• Electrical Starter Panel with 2 spare 25HP Starters
• Remote Control Operator Station
• Hydraulic Actuation of Hopper/Feeder for Travel/
  Operational Positions

Under Crusher Conveyor (UCC)

• Class II
• 10 HP, 100 FPM, 30″ BW x 26′ Long Conveyor
• TAII Dodge Shaft Mounted Gear Reducer
• Channel Frame Construction
• CEMA D5 Idlers
• 4″ Long Skirt Board with Canoe Liners
• 3-Ply, 330 PIW Conveyor Belting with 1/4″ x 1/8″ Cover,
  Vulcanized
• Primary Belt Cleaner

Chassis

• Wide Flange Fabricated Frame Complete
  with Cribbing Supports
• Tandem Axle Suspension with Twelve 11R24.5 Tires
• Road Ready (Airbrakes, Mud Flaps)
• Walkway Access on Four Sides of Crusher
• Platform for viewing crusher cavity

Available Options

• Hydraulic Set-up Jacks

The post MC8HRC Roll Crusher Plant appeared first on Mellott.

• Unit is Pre-Plumbed For Single Point Fresh Water Connection (8″ Pipe-8″-Bolt Flange)

• Two (2) 1 1/2″ Chase Water Connections w/ Gate Valve For Even Distribution Between Screws

• Manifold w/ Flow Control Valves For Individual Spray Bars

• Eleven (11) Screen Spray Bars, Each w/ V-Jet Nozzles

Screen Chutes & Fines Chute

• Slurry Style Screen Feed Chute To Pre-Soak Material

• Chutes Constructed From 3/16″ Mild Steel w/ 3/16″ AR400 Liners

•Roll away oversize discharge chute w/ 2 sets of finger gates for blending

• Reversible Discharge chutes

• Fines Flume w/ Wash Back Line

Chassis

• Heavy Duty Fabricated Frame w/ Cribbing Supports

• Dual Axle Suspension w/ Eight (8) 11R24.5 Tires

• Road Ready (Air Brakes, Mud Flaps)

Access

• Walkway Access Around Three (3) sides of screen w/ stair access to grade

Screen

• Metso FS303, 6′x20′, 3 Deck, Horizontal

• Triple-Shaft, MV2 Mechanism

• Weld-Free Side Plates w/ Huck Bolt Construction

• Single-Crown-Construction Decks For Side Tensioned Media

• 50 HP, 1200 RPM, TEFC (NEMA C) Motor

• Replaceable Feed Box & Discharge Lip Liners

Fine Material Washer

• Twin 36″x25′ Fine Material Double Screw Washer

• 1/4″ Mild Steel Tub Construction

• Welded Steel Flights w/ Replaceable Shoes

• Adjustable Discharge Chute

• Two (2) 15 HP, 1800 RPM NEMA Premium Efficiency Motors

Available Options

• Pre-Wired Electrical Starter Panel

• Hydraulic Leveling Legs w/ Power Pack

The post MC6203W Wash Plant appeared first on Mellott.

• Metso HR 52″x24′ Vibrating Feeder

• 50 HP, 1800 RPM, TEFC Electric Motor

• 16′ Pan w/ Replaceable ¾″ AR Liners

• 8′ Grizzly Section w/ Adjustable Bars

Jaw Crusher

• Metso C130 Jaw w/ Integral Motor-Mount

• Feed Opening 51″(W)x39″(D)

• 250 HP Crusher Duty Motor 1200 RPM, TEFC

• Closed Side Setting 4″– 10″

• Composite Guards, Crusher Feed Chute

Chassis

• Heavy Duty Fabricated Frame Complete w/ Cribbing Supports

• Triple-Axle Suspension with Twelve (12) 11R24.5 Tires

• Road Ready (Air Brakes, Light Kit, Mud Flaps)

Under Crusher Conveyor

• 30 HP, 48″(W)x35′(L) Conveyor

• Channel Frame Construction

• CEMA C5 Idlers

• Rubber Impact Bed @ Load Zone

Available Options

• Hydraulic Breaker and Support Structure

• Control House

• Pre-Wired Electrical Starter Panel

• Hydraulic Leveling Legs w/ Power Pack

The post MC130P Jaw Crushing Plant appeared first on Mellott.

VIBRATING GRIZZLY FEEDER

42″ x 17′ Vibrating Feeder

5′ Grizzly Section w/ Adjustable Bars

12′ Long Pan w/ Replaceable 1/2″ AR Liners

40 HP, 1200 RPM, TEFC Electric Motor

JAW CRUSHER

Metso C106 Jaw w/ Integral Motor Mount

Feed Opening 42″ wide by 34″ Deep

150 HP, 1200 RPM TEFC Crusher Duty Motor

Closed Side Setting 2 3/4″-8″

Composite Guards, Crusher feed chute

CHASSIS

Heavy duty Fabricated Frame Complete with Cribbing Supports

Tri-Axle Suspension w/ Twelve 11R24.5 Tires

Road Ready with airbrakes and Mud Flaps

UNDER CRUSHER CONVEYOR

42″ BW x 30′ Long Conveyor

15 HP Motorized Head Pulley

Channel Frame Construction

CEMA C5 idlers

4′ long impact bed at loading zone

Belt Scraper

AVAILABLE OPTIONS

Pre-Wired Plant with Electric Starter Panel

Hydraulic Lifting Legs

Breaker w/ Support Structure

Control House

The post MC106P Jaw Crushing Plant appeared first on Mellott.

Heavy Duty Fabricated Frame w/ Cribbing Supports

Fold Down Kingpin Cribbing Supports

Tandem Axle Suspension w/Eight IIR 24.5 Tires

Road Ready (Airbrakes, Mud Flaps)

Access Stair

SCREEN

Metso FS403 horizontal screen

Adjustable Motor Base

Right Hand Drive

75HP Motor

Replaceable Feed Box & Discharge Lip Liners

Deck Design for Side Tensioned Media

CHUTES AND HOPPERS
1/4″ MS Fines Hopper w/ Bolted 1/2″ Rubber Liners

1/4″ MS Discharge Chute w/bolted 1/2″ Rubber Liners

Bottom/Middle/Lower Discharge Chutes Reversible to Feed Either Side of Unit

Reversible to Feed to Either Side of Unit

Blending Top and Bottom to Middle

UNDER SCREEN FINES CONVEYOR

60″ Horizontal Fines Conveyor 27′-0″ Long

Dodge 10 HP Motorized Gearbox/Pulley

Manual Screw Take-ups

Primary Belt Cleaner

Channel Frame Construction

AVAILABLE OPTIONS

Pre-Wired Electrical Starter Panel

Hydraulic Leveling Legs w/ Power Pack

Screen Media/Installation

The post MC8203D Screen Plant appeared first on Mellott.

Heavy Duty Fabricated Frame w/ Cribbing Supports

Fold Down Kingpin Cribbing Supports

Tandem Axle Suspension w/Eight IIR 24.5 Tires

Road Ready (Airbrakes, Mud Flaps)

Access Stair

SCREEN

Metso FS303

Adjustable Motor Base

Right Hand Drive • 50 HP Motor

Replaceable Feed Box & Discharge Lip Liners

Deck Design for Side Tensioned Media

CHUTES AND HOPPERS

1/4″ MS Fines Hopper w/ Bolted 1/4″ AR Liners

1/4″ MS Discharge Chute w/ 1/4″ AR Liners

Oversize discharge chute with two (2) sets of finger gates for blending

Reversible Discharge Chutes

UNDER SCREEN FINES CONVEYOR

60″ Horizontal Fines Conveyor 25′-3″ long

Dodge 10 HP Motorized Gearbox/Pulley

Manual Screw Takeups

Primary Belt Cleaner

Channel Frame Construction

AVAILABLE OPTIONS

Pre-Wired Electrical Starter Panel

Hydraulic Leveling Legs w/ Power Pack

Screen Media/Installation

The post MC6203D Screen Plant appeared first on Mellott.

• Metso HP200 Cone Crusher with standard coarse manganese
• Hydraulic / Lubrication Power Unit
• Automatic Tramp Release
• 200 HP Crusher Duty Motor 1800 RPM,

Screen

• Metso FS253, 6’x 16’, 3 Deck
• Triple Shaft, MV2 Mechanism
• Weld Free Side Plates w/ Huck Bolt Construction
• Single Crown Construction Decks For Side Tensioned Media
• 50 HP, 1200 RPM, TEFC (NEMA C) Motor
• Replaceable Feed Box & Discharge Lip Liners

Chassis

• Heavy Duty Fabricated Frame Complete w/ Cribbing Supports
• Fold Down Kingpin Cribbing Supports
• Triple Axle Suspension with Twelve 11R24.5 Tires
• Road Ready (Airbrakes, Light Kit, Mud Flaps)

Screen Chutes

• Chutes Constructed From 3/16” Mild Steel w/ AR400 Liners
• Splitter Chute w/ Flop Gate @ Screen Discharge

Access

• Walkway Access Around 3 Sides Of Screen w/ Stair Access to Grade

Under Crusher Conveyor

• 15 HP, 30” BW x 35’ Long Conveyor w/ Diverter Head Chute
• Channel Frame Construction
• Cema C5 Idlers
• Rubber Impact Idlers @ Load Zone

Screen Feed Conveyors

• 20 HP, 36” BW x 43’ Long Conveyor
• 5 HP, 36” BW x 16’ Long Conveyor
• Channel Frame Construction
• CEMA C5 Idlers
• Rubber Impact Idlers @ Load Zone

Under Screen Fines Conveyor

• 10 HP, 60” BW x 18’ Long Conveyor
• Channel Frame Construction
• CEMA C5 Idlers

Plant will be completely wired with S.O. cord from the motors back to an electrical control panel.

Unit has approx. 1,000 hours. 

Please call for details. 

The post Used 2022 Mellott MC200HPS-CC Cone Crushing Plant appeared first on Mellott.

• 20-30 hp, 350 fpm, 30″-53″ BW, 60′-100’Long
  Conveyor
• 24″- 42″ Deep Truss Frame Construction
• 18″ CEMA Rated Drum Head Pulley w/ ⅜”
  Herringbone Lagging
• 18″ CEMA Rated Wing Tail Pulley
• Dodge TAII Class II Reducer
• CEMA B5 Idlers
• Dodge LD 18″ Screw-Take-up
• Dodge SCM Bearings
• 2-PLY, 220 PIW Conveyor Belting w/ 3/16″ x 1/16″
• Covers w/ Mechanical Splice
• Head and Tail Fully Assembled prior to Shipping
  (Other components shipped disassembled)
• Belt Cleaner

Loading Hopper

• 10′ Length
• Rubber Flashing
• Simple Installation
• Inside of Skirts = 2/3 BW

Supports

• Fixed Rear Booms
• Adjustable Front Boom 4.5 degrees – 18 degrees
• Tubular Axle Assembly
• Swivel Wheels
• Tail-End Pivot Anchor Plate

Available Conveyor Options

• 5′ Long Enlarged Hopper (BW + 12″)
• Fixed Front Boom
• 3-PLY 300 PIW Belting
• CEMA C5 Idlers
• Conveyor Dust Covers or Walkway Access
• Extended Skirtboard in 5 ft. Sections
• AR400 Skirtboard Liners
• 1 1/2 HP or 3 HP Power Travel Drive
• Available in 30-42″ BW and 60′, 80′ or 100′ Lengths

The post Mellott MC Radial Conveyor Kits 60′-100′ Class appeared first on Mellott.

• 30hp, 350 FPM, 36″BW, 80′-100′ Long Conveyor
• 42″ Deep Truss Frame Construction
• 18″ CEMA Rated Drum Head Pulley w/ 1/2″ Herringbone Lagging
• 18″ CMA Rater Wing Tail Pulley
• Dodge TAII Class II Reducer
• CEMA C5 Idler
• Mellott Manufactured manual 18″ Screw Take-Up
• Dodge SCM Bearings
• 3- PLY, 330 PIW Conveyor Belting w/ 1/16″ x 1/4″ Covers w/ Mechanical Splice
• Belt Cleaner

Loading Hopper

• 10′ – 0″ Length
• Rubber Flashing
• Simple Installation
• Inside of Skirts = 2/3 BW

Supports

• Fixed Rear Booms
• Adjustable Front Boom 8 degrees – 18 degrees
• Tubular Axle Assembly
• Swivel Wheels
• Tail-End Pivot Anchor Plate

Available Conveyor Options

• AR400 Skirtboard Liner
• 1 1/2 HP or 3 HP Travel Drive
• Waterline Dust Suppression Kit
• Available in 30-42″ BW and 80′ or 100′ Lengths

The post Mellott MC OTR (Over-The-Road) Conveyor Kits 80′-100′ Class appeared first on Mellott.