• 20-30 hp, 350 fpm, 30″-53″ BW, 60′-100’Long
  Conveyor
• 24″- 42″ Deep Truss Frame Construction
• 18″ CEMA Rated Drum Head Pulley w/ ⅜”
  Herringbone Lagging
• 18″ CEMA Rated Wing Tail Pulley
• Dodge TAII Class II Reducer
• CEMA B5 Idlers
• Dodge LD 18″ Screw-Take-up
• Dodge SCM Bearings
• 2-PLY, 220 PIW Conveyor Belting w/ 3/16″ x 1/16″
• Covers w/ Mechanical Splice
• Head and Tail Fully Assembled prior to Shipping
  (Other components shipped disassembled)
• Belt Cleaner

Loading Hopper

• 10′ Length
• Rubber Flashing
• Simple Installation
• Inside of Skirts = 2/3 BW

Supports

• Fixed Rear Booms
• Adjustable Front Boom 4.5 degrees – 18 degrees
• Tubular Axle Assembly
• Swivel Wheels
• Tail-End Pivot Anchor Plate

Available Conveyor Options

• 5′ Long Enlarged Hopper (BW + 12″)
• Fixed Front Boom
• 3-PLY 300 PIW Belting
• CEMA C5 Idlers
• Conveyor Dust Covers or Walkway Access
• Extended Skirtboard in 5 ft. Sections
• AR400 Skirtboard Liners
• 1 1/2 HP or 3 HP Power Travel Drive
• Available in 30-42″ BW and 60′, 80′ or 100′ Lengths

The post Mellott MC Radial Conveyor Kits 60′-100′ Class appeared first on Mellott.

• 30hp, 350 FPM, 36″BW, 80′-100′ Long Conveyor
• 42″ Deep Truss Frame Construction
• 18″ CEMA Rated Drum Head Pulley w/ 1/2″ Herringbone Lagging
• 18″ CMA Rater Wing Tail Pulley
• Dodge TAII Class II Reducer
• CEMA C5 Idler
• Mellott Manufactured manual 18″ Screw Take-Up
• Dodge SCM Bearings
• 3- PLY, 330 PIW Conveyor Belting w/ 1/16″ x 1/4″ Covers w/ Mechanical Splice
• Belt Cleaner

Loading Hopper

• 10′ – 0″ Length
• Rubber Flashing
• Simple Installation
• Inside of Skirts = 2/3 BW

Supports

• Fixed Rear Booms
• Adjustable Front Boom 8 degrees – 18 degrees
• Tubular Axle Assembly
• Swivel Wheels
• Tail-End Pivot Anchor Plate

Available Conveyor Options

• AR400 Skirtboard Liner
• 1 1/2 HP or 3 HP Travel Drive
• Waterline Dust Suppression Kit
• Available in 30-42″ BW and 80′ or 100′ Lengths

The post Mellott MC OTR (Over-The-Road) Conveyor Kits 80′-100′ Class appeared first on Mellott.

Drive specifications (Main / Stinger)
Drive Class I head end
Gear reducers Dodge shaft mount
Backstops installed in reducers
Motors 40/30 HP 1800 RPM TEFC
V-belt drive with drive guard
Capacity 800 STPH of 100 PCF material, 25 degree surcharge (90% fines, 10% spherical lumps 6” minus)
Belt speed 450/650 FPM

Superior pulleys
Drive pulleys 16” diameter, 3/8” herringbone lagged drum
Tail pulleys 14” diameter, CEMA Chevron® wing pulley
Shafts Turned and polished
Bearings Dodge
Take ups Screw type

Portability
Undercarriage Patented FB® Undercarriage, with hydraulic raise cylinders, 15 hp pumping unit, and covers
Axle type FD 50 axle
Transport axle (8) 11R-22.5 tires, tandem walking beam. 11’11” travel width.
Tag axle not included
Axle Jacks not applicable
Comp. Linkage slip-joint, for raising and lowering of conveyor with wheels in radial position
Radial axle (4) 385/65D-19.5 tires on hydraulic outriggers. 18’5” stacking width
Radial travel four wheel drive with 2 HP planetary on each wheel 4% grade
Fifth wheel included
Anchor pivot secures tail end during radial travel
Brakes complete air brake package
Lights brake and directional signals
Mud flaps installed behind transport wheels
Landing gear adjustable height with pin locks
Towing eye adjustable, for pit transport

Conveyor Components
Belting 3 ply, 3/16 x 1/16 330 PIW
Belt splice factory vulcanized belt splice
Scrapers Superior Exterra® Primary Belt Scraper, on main and stinger
Superior Idlers CEMA C, 5” dia. rolls, sealed for life ball bearings
Idler Seal Standard SpinGuard Seal
Load area (main) Superior Seal System, with 10″ cartridges and steel rollers
Steel can troughing aligner on main / Superior Navigator® on stinger
Trough 35° on 4′ spacing
Returns steel cans, on 8′ spacing
Self-aligning Steel can troughing aligner on main / Superior Navigator® on stinger
Radial hopper Rock box style
Gathering trough 6’ long with adjustable rubber flashing
Spray bars not included

Controls
Control system PilePro v12 automation – FD axle, power travel, conveyor raise, and stinger extension controlled by PLC parameters or with panel mounted switches, includes auto-level
Panelview 1000 not included
Slide-track galvanized c-rail and steel wheels to deliver hydraulic hoses and electrical cords to stinger
Matl. flow switch SonicScout ultrasonic sensor, stops power travel when belt is empty
Wireless remote not included
Zero Speed Sensor not included
Voltage 480 v / 3 ph / 60 Hz
Electrical enclosure with main disconnect, circuit breaker, and starters with on/off push buttons to control each electric motor

The post Superior 36″ x 150′ Portable Telestacker Conveyor appeared first on Mellott.

Track length: 10′

Track width: 16″
• Elect automation controls with dog lead remote for tracking
• Heavy duty steel construction
• Galvanized telescopic legs
Transport Dimensions
• Length: 41’41
• Width: 7′-4″
• Height: 8′-7″
Paint
• Grey with deep orange guarding

The post Ecoverse EcoStack 8036K Track Stacker appeared first on Mellott.

• 14″CEMA Rated Head Pulley w/ 3/8″ Lagging
• Direct Drive Gearbox
• 378 FPM, 30″ – 36″ BW, 20′ through 60′ Long Conveyor
  (20HP/30BW or 25HP/36BW)
• 24″ Deep Truss Frame Construction
• CEMA B5 30 BW or CEMA C5 36BW Idlers
• CEMA Rater 12″ Wing Tail Pulley
• 12″ SCrew Take-up with SCM Pillow Block Bearings
• 2- PLY, 220 PIW Conveyor Belting w/ 3/16″ x 1/16″ Covers w/
  Mechanical Splice
• Fully Assembled Prior to Shipping
• Easily Removable Tail Guards for Quick Access to Pulley & Bearings
• Open Top Design

Load Hopper

• Low Profile Design
• Rubber Flashing
• Folds for Shipping
• 1/4″ AR Liners
• 10′ Long Skirtboard Extension

Support Options

• Adjustable from 4.5 degrees to 18 degrees

Available Conveyor Options

• Discharge chute
• 3-PLY, 330 PIW Belting
• CEMA C5 Idlers
• Available in 30-42″ BW and 60′, 80′, or 100′ Lengths

The post Mellott MC Stacker Kits 60′-100′ Class appeared first on Mellott.

* Feed hopper – Standard

* Hopper wear plates – Included

Power Unit

* Diesel engine – CAT

* Motor power – 37kW/49hp

* Emission class – Tier 4

��Conveyor

* Belt type – Plain

Optional Equipment

* Remote control for tracking – Included

Finishing

* Color – Metso Beige

* Safety labels – ANSI

The post Metso Nordtrack CT85 Track Conveyor appeared first on Mellott.